Samsung G530H (Stock) With Tool

G530H 4FILE , WITH TOOLS DOWNLOAD

BL AP CP CSC

FIRMWARE:  DOWNLOAD 

2

DOWNLOAD

ODIN  3.10.6: DOWNLOAD

USB DRIVER:DOWNLOAD

how to update with odin

1

• Download the firmware  for Galaxy G530H on your PC from the above link and extract the firmware, You’ll get a tar.md5 file after extraction.
• Download Odin v3.10 from above link and extract it.

2

• Now Turn off your phone.

3

• Press and hold Home+Power+Volume Down button for few seconds and release when a warning screen appears. Press the Volume Up button from the warning screen to enter into download mode.

4

• Launch Odin v3.10on your computer and then connect your Galaxy G530H to the computer via USB Data Cable.

5

• The ID”Com box in Odin will turn blue. This means that your device is connected successfully.

6

• In Odin click on the AP option and choose the extracted (tar.md5)  firmware for Galaxy G530H that you downloaded in the first step.
• Make sure F.Reset Time and Auto Reboot options are checked in Odin.

7

• After doing all the above steps and all is set, click on the Start button to begin the process. Odin will start flashing the firmware on the phone. Wait for some time to complete the process.

Note: If Odin stops at any point then unplug the cable, close Odin, run Odin again and repeat the process.

8

• After the completion of the process. Odin will show a PASS message on the Screen and your device will restart automatically.

9

Disconnect the device from the computer when it restarts and wait for some time. At first start-up your device may take some time to show up the home screen. So have patience till it shows the home screen. And All Done!!!

after all process complete do hard reset from the system recovery menu